Emerson Process Management 51000 Manuale Utente Scaricare il pdf

Baumann

™

51000 Series Instructions

Instruction

51.LF:IM

April 2007

INTRODUCTION

The Baumann 51000 series control valve is optimally

designed for demanding low ﬂ ow control and is a

perfect ﬁ t where space is at a premium. This compact

package provides the connection integrity of ﬂ anged

body globe valves while being signiﬁ cantly lighter and

easier to install.

SCOPE OF MANUAL

This instruction manual includes installation,

maintenance, and parts information for the 51000

series control valve and type 16 actuator.

No person may install operate or maintain a 51000

series control valve without ﬁ rst being fully trained and

qualiﬁ ed in valve, actuator and accessory installation,

operation and maintenance, and carefully reading and

understanding the contents of this manual. If you have

any questions about these instructions contact your

Fisher

sales ofﬁ ce before proceeding.

CONTENTS

Introduction.................................................................1

Scope......................................................................1

Safety Precautions..................................................1

Maintenance...............................................................2

Installation...................................................................3

Actuator Removal....................................................3

Plug and Packing Replacement..............................3

Disassembly of Valve..............................................3

Reassembly of Valve...........................................3

Body Assembly Part Numbers...............................4

Type 16 Actuator Part Numbers...........................6

Dimensions and Weights............................................7, 8

Always wear protective gloves,

clothing, and eye wear when

performing any installation operations

to avoid personal injury.

Personal injury or property damage

caused by sudden release of pressure

or bursting of pressure retaining parts

may result if service conditions exceed

those for which the product was

intended. To avoid injury or damage,

provide relief valve for over pressure

protection as required by government

or accepted industry codes and good

engineering practices.

Check with your process or safety

engineer for any additional measures

that must be taken to protect against

process media.

If installing into an existing application,

also refer to the WARNING at the

beginning of the Maintenance section

in this instruction manual.

This valve is intended for a speciﬁ c

range of pressures, temperatures

and other application speciﬁ cations.

Applying different pressures and

temperatures to the valve could

result in parts damage, malfunction

of the control valve or loss of control

of the process. Do not expose this

product to service conditions or

variables other than those for which

the product was intended. If you

are not sure what these conditions

are you should contact your Fisher

sales ofﬁ ce for more complete

speciﬁ cations. Provide the product

serial numbers (shown on the

nameplate) and all other pertinent

information.

NOTE

Neither Emerson

, Emerson Process

Management, Fisher

, nor any of

their afﬁ liated entities assumes

responsibility for the selection, use

and maintenance of any product.

Responsibility for the selection, use

and maintenance of any product

remains with the purchaser and end-

user.

Baumann

™

51000 Series Low Flow

Control Valve Instructions

:$51,1*

1 2 3 4 5 6 7 8

Sommario

Pagina 1 - Control Valve Instructions

1Baumann™ 51000 Series InstructionsInstruction51.LF:IMApril 2007INTRODUCTIONThe Baumann 51000 series control valve is optimally designed for demanding

Pagina 2 - 51000 Series Instructions

2Instruction51.LF:IMApril 2007Baumann™ 51000 Series InstructionsIf you move or work on an actuator installed on a valve with loading pressure applied,

Pagina 3

3Baumann™ 51000 Series InstructionsInstruction51.LF:IMApril 2007INSTALLATION1. Before installing the valve in the pipeline, thoroughly clean the line

Pagina 4

4Instruction51.LF:IMApril 2007Baumann™ 51000 Series InstructionsKEY NO.DESCRIPTION QTYPART NUMBER0.25" SS0.25" N10276 Nickel Alloy0.5"

Pagina 5

5Baumann™ 51000 Series InstructionsInstruction51.LF:IMApril 2007bonnet - conﬁ rm correct orientation - then secure with hex nuts (7). DO NOT TIGHTEN

Pagina 6

6Instruction51.LF:IMApril 2007Baumann™ 51000 Series InstructionsTable 4. TYPE 16 ACTUATOR PART NUMBERSKEY NO.QTY DESCRIPTION PART NUMBER17 1 Yoke - M

Pagina 7

7Baumann™ 51000 Series InstructionsInstruction51.LF:IMApril 2007Table 5. DIMENSIONS AND WEIGHTS, BODY SUBASSEMBLYVALVE SIZE AMATERIALAPPROXIMATE WEIG

Pagina 8

8Instruction51.LF:IMApril 2007Baumann™ 51000 Series InstructionsACTUATOR TYPEINSTRUMENTAPPROXIMATE WEIGHTlbs kg16Actuator without instrument 4.0 1.8Ty

Commenti su questo manuale

Nessun commento

Emerson Process Management 51000 Manuale Utente

Navigare online o scaricare Manuale Utente per no Emerson Process Management 51000. Emerson Process Management 51000 User's Manual Manuale Utente

Sommario

Commenti su questo manuale

Prodotti e manuali riguardandi no Emerson Process Management 51000